FiscalNET Configuration: Model, COM Port and Baud Rate

Before configuration

Install the correct version of FiscalNET and connect the device to the PC. The cash register must be prepared for connection to the computer according to the model. See equipment datasheet for the interface and settings.

Configure the connection

1. Select the driver type

   In the tab Configuration, select the appropriate driver for the connected cash register.

   

2. Select the communication port

   For the serial connection, select the COM port displayed for the device in Device Manager from Windows. The port shown in the screenshot is an example.

   

3. Match the communication speed

   Select the speed set in the cash register. The value must match on both devices; do not automatically copy the value from the image.

   

4. Save and test

   Press Save and test to check the connection parameters.

   

5. Check activation and connection

   Once the licence activation has been confirmed by the FiscalNET team, use Application activation, if this order is displayed. In the interface shown, the green tick on the cash register confirms the connection.

   

If the connection does not occur

Recheck the selected model, the COM port, the speed, and the readiness of the cash register for connection to the PC. For the exact messages, see error codes. An activation issue is dealt with separately, in online activation guide.

Continue with the appropriate guide

Do you need help?

Send to suport@fiscalnet.ro FiscalNET version, equipment model, connection type and the exact message displayed.