The USB device does not appear
Check the power supply, the data cable and the USB driver. If the driver creates a virtual COM port, check it in Device Manager.
Equipment Catalogue · Incotex
Incotex SuccesM7
Connection interfaces, device preparation, and configuration in FiscalNET.
Equipment and connections.
Cash register
- Interfaces
- USB-B · RS-232 · Ethernet (LAN) · Optional Wi-Fi
For the network, the manual supplement indicates the device’s IP address and port 9198, which can be changed. USB Host is for saving files, not for PCs.
Preparing the device.
Choose the connection
Use USB-B, RS-232 or Ethernet. Wi-Fi requires the version with the corresponding module. USB Host is intended for saving files.
Configure the connection to the PC
Enable the communication mode with the PC and the interface selected from the device menu. For USB / serial, note the COM port and the baud rate.
For the network: note the IP address and the port
Use the IP address configured on the device. The manual supplement indicates TCP/IP port 9198, which can be changed; in FiscalNET, enter the value actually configured.
Select the profile in FiscalNET
Select the Incotex Succes M7 profile and the connection used. The parameters in the application must match the device.
Check the response
Close the other utilities that are using the device and check its identification and status in FiscalNET.
Configuration in FiscalNET V3.
The screenshots show the application menus, not a connection tested with every model. Use your device’s parameters; on Android, confirm the supported profile and interface for the installed model.
Windows · V3 configuration
Add the device and select Manual
Open Fiscal Equipment → Cash Registers and tap + Add. Select Manual to complete the device profile and parameters. If the device already exists in the list, open its configuration.
Enlarge image Windows · Choosing the method of addition. Complete the device parameters
Select the profile that matches the model. For USB, select the device or the virtual COM port created by the driver; enter the baud rate only when the profile requires it. For RS-232, enter the COM port and the device speed. For the documented network, enter the IP address and the port of the device. The values in the screenshot are examples.
Enlarge image Windows · configuration form.
Save and check the response
Use Test Connection and check the device’s identification and status. Save the configuration after a correct response.
If the device is not respondingAndroid · V3 configuration
Open the list of equipment
In FiscalNET, open Case de marcat and tap +.
Enlarge image Android · list of equipment. Choose manual configuration
Select Manual to complete the profile and parameters. The test AMEF is a virtual device.
Enlarge image Android · Choosing the method of adding. Complete the device parameters
Select the supported profile for the model and open the connection field.
Enlarge image Android · configuration form. Check the connection type
Select the interface supported by the profile and fill in the device parameters. For the network, use the configured IP address and port. Under USB, select the device detected on Android.
Enlarge image Android · connection options.
Save and check the response
Use Test Connection and check the device’s identification and status. Save the configuration after a correct response.
If the device is not respondingDo you use FiscalNET V2? View the V2 configuration with images
If the device is not responding.
The device is not responding
Check the operating mode and the device profile. For USB, check the device or the virtual port assigned by the driver. For RS-232, compare the COM port and the baud rate. For the network, compare the IP address and the communication port.
Connection busy or interrupted
Close the other programs that are using the device. After an interruption, check the status of the receipt before resending.
Do you need assisted configuration?
Send the device model, the connection used, the FiscalNET version, and the error message.